Orion EON 110, Meade 10' SCT Orion Mount - Exos2-PMC. Meade Mount 'push to' alt az with clockwork drive APT, SharpCap, PHD2, Stellarium, ASCOM Hub Focal Lengths Orion 660mm, Guide Scopes 188mm, SCT 2500mm Powered USB for ZWO cameras (120 and 294) Here is what happens: Cameras, sometimes work, sometimes don't. Meade LPI and DSI original - drivers - posted in Beginning Deep Sky Imaging: I suspect this has been discussed ad nauseum, but here goes. I have one of the Old Meade USB LPI cameras, and the Old Meade DSI camera. Meade has all but thrown rocks at me for even hinting that I might ask about support. Their idea of support seems to be, Our idea of support is that we want to sell you more new.

This plug-in driver is available as part of the Obsolete Driver Pack.

For this driver, please select Meade DSI on the Setup Mdg laptops & desktops driver download for windows 7. tab.

This driver controls the Meade Deep Sky Imager, which connects to the computer via a USB 2.0 interface. It operates all Meade DSI variants (I, II, and III, standard and Pro).

Drivers Meade Cameras Online

Drivers Meade Cameras Live

IMPORTANT: You must upgrade to the latest version of Meade's DSI drivers, by installing Envisage 7.05 or higher. Envisage should be installed prior to installing MaxIm DL. Envisage 7 is available from http://www.meade.com/support/downloads.html.

The Gain and Offset controls set the gain and background offset level for the imager. Drivers Medical Graphics USB devices. Typical settings are Gain of 50 and Offset of 100; please see the Meade documentation for more information on these settings.

Camera ID lets you select which camera to use as the main camera, or as the autoguider, if you have more than one DSI camera plugged in.

DSI images appear in raw format, with a CMYG Bayer pattern. To convert to full RGB color, use the Convert Color command, and set Select Camera to Meade DSI.

For DSI Pro or DSI Pro II, it is useful to select the Manual Filter Wheel. You will automatically be prompted for filter changes when running exposure sequences, and the filter slot used will also be entered into the FITS header.

These cameras are not cooled, so the cooler controls are not enabled when this camera is in use. For the DSI II and above, the CCD temperature is displayed and recorded in the FITS header. Please note that the temperature display may take 5-10 seconds to appear when you first connect to the camera.

Availability of this feature depends on Product Level.

Drivers Meade Cameras Online

Drivers Meade Cameras Live

Drivers Meade Cameras Reviews